Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the window switch panel of the Mercedes A-Class

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Window switch

With the help of the following video tutorial, we will explain how to replace the window switch panel on a Mercedes Class A model W169. To perform this procedure, it is necessary to first remove the door panel. The removal of the panel follows rather simple steps, in fact, we must remove the upper triangle of the panel and then remove the cover behind the closing handle and unscrew the two screws. Remove the side screw and unhook the panel. Disconnect the handle rod and the connector. Take the removed panel and remove the window switch panel to install the new one. Mount the panel back and check the operation of the switches.

Posted on 26 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the water pump of the Mercedes A-Class.
How to replace the water pump of the Mercedes A-Class.
Mercedes Classe A (2004-2012 / W169) .. and replace the water pump of the Mercedes Class A, as well as the Class B. Firstly, we open the engine hood and begin to locate the water pump,.. …
How to replace the engine oil in the Mercedes A-Class
How to replace the engine oil in the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. Replacing the motor oil on a Mercedes Class A vehicle model W169 is a very simple operation, and is similar to the Mercedes Class B model W245... …
How to replace the front bumper grille of the Mercedes A-Class?
How to replace the front bumper grille of the Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. the front bumper grille of the Mercedes A-Class, following the instructions below. First, we open the car's hood and begin to disassemble and remove.. …

Other guides you may be interested in

How to open the seat of the Piaggio Beverly with a flat battery

In today's video, see how to open the seat of the Piaggio Beverly if the service battery is flat. First, open the compartment located on the shield using the appropriate key. Inside, you will find a lever that you need to pull; simultaneously, release the seat by lifting it. These two actions together, with a bit of elbow grease, will allow you to open the seat in cases of extreme necessity. It is advisable to perform this operation only if absolutely necessary, as it may compromise the proper functioning of the mechanism in the long run.

Watch the video!


by ScegliAuto

More videos