Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Power Window Switch Panel on the Mercedes A-Class

Model: Mercedes Classe A W177 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

See other generations:
Video tutorial

If you need to remove the power window switch panel on this vehicle, follow the steps outlined below and check the video as well. To remove the switch panel, you must take off the entire door panel using a plastic trim tool to pry around the perimeter of the door panel and detach all the retaining clips.

Once the panel is removed, you can pull out the switch panel, being careful to disconnect the power connectors located behind it, and the job will be complete.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How can the window lift buttons of the Mercedes Classe A be disassembled?
How can the window lift buttons of the Mercedes Classe A be disassembled?
Mercedes Classe A (2004-2012 / W169) .. E 300, but it also applies to the Mercedes A Class, as the execution is identical. Simply put, a plastic lever is used to lift the entire block of.. …
How to Adjust the Power Mirrors on a Mercedes-Benz A-Class
How to Adjust the Power Mirrors on a Mercedes-Benz A-Class
Mercedes Classe A (2012-2018 / W176) .. To adjust the power mirrors on the Mercedes A-Class, go directly to the last operation. On the driver’s door, you will find the buttons to raise o.. …
How to disassemble the chrome trim of the side window of the Mercedes A-Class
How to disassemble the chrome trim of the side window of the Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. chrome seal of the side windows of the Mercedes Class A. First, we open the front door and start masking the bodywork correctly to avoid damaging it;.. …

How to Reset the AdBlue Warning Light on a Nissan Qashqai

Hello everyone! Today, I will explain how to reset the important AdBlue additive warning light on your Nissan Qashqai. Reset via the dashboard menu: turn on the car and ensure the instrument cluster is active. Scroll through the menu until you find the option “Service” or “AdBlue”. Select the “Reset” option and confirm. To top up the AdBlue level, open the tank flap and use the supplied nozzle to refill the AdBlue fluid with the engine off. Once the car is turned off and back on, the warning light should disappear if the refill was successful. Good luck.

Watch the video!


by ScegliAuto

More videos