Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the chrome trim of the side window of the Mercedes A-Class

Model: Mercedes Classe A W177 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the gray or chrome seal of the side windows of the Mercedes Class A. First, we open the front door and start masking the bodywork correctly to avoid damaging it; then we use a special lever to remove our gray or chrome seal on the side, as shown in the video.

At this point, we clean the area of interest before reassembling the new seal; in the same way, we will also replace all the other gray or chrome seals of the side windows.


Posted on 5 May 2025 by ScegliAuto


Related tutorials

How to Replace the Windows on a Mercedes A-Class?
How to Replace the Windows on a Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. To remove the windows from the Mercedes A-Class, lift the chrome trim using a screwdriver. Then, unscrew the screws covered by the trim and pull.. …
Disassembly and Replacement of the Turn Signal in the Mercedes A-Class Side Mirror
Disassembly and Replacement of the Turn Signal in the Mercedes A-Class Side Mirror
Mercedes Classe A (2018-2026 / W177) .. in the external side mirror of the Mercedes A-Class. First, remove the plastic cover of the mirror by prying it off with something thin. Then, remove.. …
Replacing the Glass of the Exterior Rearview Mirror on the Mercedes A-Class
Replacing the Glass of the Exterior Rearview Mirror on the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. the exterior rearview mirror on the Mercedes A-Class. First, approach the rearview mirror and start by disengaging the mirror glass from the rear support,.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos