Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe A
    4. : How to check the electric mirrors on the Mercedes-Benz A-Class

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Outside rearview mirror
Operation: How to check the electric mirrors on the Mercedes-Benz A-Class

To perform the closing of the electric mirrors on the Mercedes A-Class, we can go directly to the last operation. On the driver's side door we find the buttons to raise or lower the electric windows while immediately above we find the buttons for adjusting the electric mirrors. To operate the electric mirrors, press the button with the left mirror depicted if you need to adjust the driver's side mirror, while the button with the right mirror depicted must be pressed if you need to adjust the passenger side mirror. To close the mirrors, press the central button between the two described above, where a mirror is shown with an arrow pointing inwards.


Posted on 12 July 2022 by ScegliAuto

    Frequently Asked Questions

    • Classe A 2012-2018 - Where is the fuse for the external rearview mirror located in the Mercedes A-Class? Read Answer
    • Classe A 2012-2018 - How do you remove the left mirror of the Mercedes A-Class A176? Read Answer
    • Classe A 2012-2018 - Why do the mirrors of the Mercedes A-Class not close? Read Answer
    • Classe A 2012-2018 - Why don't the electric rear-view mirrors of a Mercedes A-Class close? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos