Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe M
  6. : Fuel pump

Mercedes Classe M - Fuel pump

Mercedes Classe M (2011-2018 / W166)
Guide to replacing the fuel pump of the Mercedes ML

The replacement of the fuel pump on the Mercedes ML involves removing the tank; it is therefore necessary to lift the vehicle and proceed with the removal of …read all…
Posted on 13 April 2024 by ScegliAuto
Mercedes Classe M (2011-2018 / W166)
How to disassemble the fuel pump in the Mercedes M-Class?

In this tutorial we can see how to disassemble the fuel pump in the Mercedes M-Class, a simple operation but one that requires good manual dexterity. First of …read all…
Posted on 13 April 2024 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
How to remove the fuel pump of a Mercedes M-Class

Before we can start, we will have to go and disconnect the battery of our Mercedes M-Class, so that we can work in total safety. Let's start by lifting the …read all…
Posted on 16 January 2024 by ScegliAuto
Mercedes Classe M (2005-2011 / W164)
How to replace the pump and float on a Mercedes-Benz ML 430

In the video we show you we have already removed the old pump and we are preparing to put a new one in position. If you do not know how to proceed with the …read all…
Posted on 8 December 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Removing the fuel pump of a Mercedes M-Class

Let's see the disassembly of the fuel pump of a Mercedes M-Class. To begin with, we disconnect the battery cables, then, we remove the rear seats of the car. …read all…
Posted on 25 November 2023 by ScegliAuto
Mercedes Classe M (2005-2011 / W164)
How to disassemble the floating fuel pump of a Mercedes Ml

How to disassemble the floating fuel pump of a Mercedes Ml. To begin we disconnect the battery cables, then, we remove the rear seat of the car; unscrew the …read all…
Posted on 28 October 2023 by ScegliAuto

Airbags (3) Loudspeaker (2) Air conditioning (3) Car stereo (5) Battery (11) Coil (1) Air Vents (3) Gearbox (8) Spark plugs (1) Glow plugs (4) Bodywork (4) Control unit (1) Key (5) Timing belt (1) V-belt (4) Air conditioning controls (1) -board computer (7) Checks and maintenance (25) Dashboard (1) Bearing (2) Mass air flow sensor (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Grille (2) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (4) Rear light bulb (2) Antifreeze liquid (5) License plate light (1) Third brake light (1) Engine (8) Gear oil (1) Engine oil (4) Door panel (5) Front bumper (4) Rear bumper (6) Brake pads (3) Hydraulic pistons (1) Tires (3) Pump (1) Fuel pump (6) Door (3) Push button (2) Window lift button (5) Instrument cluster (4) Radiator (4) Fuse box (17) Crankshaft RPM sensor (1) Lock (2) Suspensions (1) Outside rearview mirror (2) Transmission (1) Central tunnel (4) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos