Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Push button

Mercedes Classe M - Push button

Mercedes Classe M (1997-2005 / W163)
Replacement button to raise car window
The guide shows how you can change the button to raise the window of your car. It is a very simple operation that does not require the help of the mechanic. …read all…
Posted on 14 September 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Replacement of window lifter control push-button panel
The push-button panel for the glass lifting and external mirror adjustment controls is located on the lining of the central tunnel, immediately behind the gear …read all…
Posted on 29 August 2023 by ScegliAuto
Airbags (3) Loudspeaker (2) Air conditioning (3) Car stereo (5) Battery (11) Coil (1) Air Vents (3) Gearbox (8) Spark plugs (1) Glow plugs (4) Bodywork (4) Control unit (1) Key (5) Timing belt (1) V-belt (4) Air conditioning controls (1) -board computer (7) Checks and maintenance (25) Dashboard (1) Bearing (2) Mass air flow sensor (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Grille (2) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (4) Rear light bulb (2) Antifreeze liquid (5) License plate light (1) Third brake light (1) Engine (8) Gear oil (1) Engine oil (4) Door panel (5) Front bumper (4) Rear bumper (6) Brake pads (3) Hydraulic pistons (1) Tires (3) Pump (1) Fuel pump (6) Door (3) Push button (2) Window lift button (5) Instrument cluster (4) Radiator (4) Fuse box (17) Crankshaft RPM sensor (1) Lock (2) Suspensions (1) Outside rearview mirror (2) Transmission (1) Central tunnel (4) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos