Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Oil filter

Mercedes Classe M - Oil filter

Oil Filter Mercedes Classe M (1997-2005 / w 163)

Mercedes Classe M (1997-2005 / W163)
Engine Oil and Filter Replacement
This video shows how to replace the engine oil and filter. First, raise the car on a ramp and remove the undertray to access the oil sump bolt more easily. …Read all…
Posted on 16 February 2026 by ScegliAuto
Cigarette lighter (1) Airbag (4) Speaker (3) Air conditioning (4) Car stereo (8) Roof rack bars (1) Battery (16) Ignition coil (1) Air vents (3) Transmission (7) Spark plugs (1) Glow plugs (4) Body (6) Glove compartment (1) Control unit (3) Key (5) Timing belt (5) V-belt (5) A/C controls (1) Onboard computer (2) Checks and maintenance (10) Dashboard (2) Bearing (3) MAF sensor (1) Brake rotors (1) Rear bench seat (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (9) Cabin air filter (8) Oil filter (1) Parking brake (1) Clutch (1) Grille (2) Accessory kit (4) Light bulb (1) Side marker bulb (2) Headlight bulb (7) Tail light bulb (4) Antifreeze coolant (5) License plate light (2) (1) Engine (7) Transmission fluid (1) Engine oil (4) Clock (25) Door trim panel (5) Front bumper (5) Rear bumper (7) Brake pads (3) Tires (2) Pump (1) Fuel pump (6) Car door (2) Push button (2) Power window switch (6) Instrument cluster (1) Radiator (6) Fuse box (48) Seat (1) Crankshaft position sensor (1) Door lock (3) Suspension system (1) Side mirror (4) AdBlue warning light (4) Warning light – error code (7) Tire pressure warning light (18) Service warning light (25) Drivetrain (1) Center console tunnel (4) EGR valve (2) Blower motor (1) Steering wheel (2)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos