Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Brake pads

Mercedes Classe M - Brake pads

Brake Pads Mercedes Classe M (2005-2011 / w 164)

Mercedes Classe M (1997-2005 / W163)
Replacing Rear Brake Pads
Lift the vehicle using a car jack or on suitable axle stands and remove the rear wheel. To aid the retraction of the caliper piston, the video shows a method …Read all…
Posted on 15 February 2026 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Replacing the Brake Pads
Brake pads serve to clamp the brake disc to create friction that slows down the rotation of the disc. Brake pads wear out before the discs, so they need to be …Read all…
Posted on 15 February 2026 by ScegliAuto
Mercedes Classe M (2005-2011 / W164)
Brake Pad Replacement
Lift the vehicle on suitable axle stands and remove the wheel; take off the protective caps from the caliper securing bolts and unscrew them; detach the front …Read all…
Posted on 10 February 2026 by ScegliAuto

Brake Pads Mercedes Classe M (1997-2005 / w 163)

Mercedes Classe M (1997-2005 / W163)
Replacing Rear Brake Pads
Lift the vehicle using a car jack or on suitable axle stands and remove the rear wheel. To aid the retraction of the caliper piston, the video shows a method …Read all…
Posted on 15 February 2026 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Replacing the Brake Pads
Brake pads serve to clamp the brake disc to create friction that slows down the rotation of the disc. Brake pads wear out before the discs, so they need to be …Read all…
Posted on 15 February 2026 by ScegliAuto
Mercedes Classe M (2005-2011 / W164)
Brake Pad Replacement
Lift the vehicle on suitable axle stands and remove the wheel; take off the protective caps from the caliper securing bolts and unscrew them; detach the front …Read all…
Posted on 10 February 2026 by ScegliAuto
Cigarette lighter (1) Airbag (4) Speaker (3) Air conditioning (4) Car stereo (8) Roof rack bars (1) Battery (16) Ignition coil (1) Air vents (3) Transmission (7) Spark plugs (1) Glow plugs (4) Body (6) Glove compartment (1) Control unit (3) Key (5) Timing belt (5) V-belt (5) A/C controls (1) Onboard computer (2) Checks and maintenance (10) Dashboard (2) Bearing (3) MAF sensor (1) Brake rotors (1) Rear bench seat (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (9) Cabin air filter (8) Oil filter (1) Parking brake (1) Clutch (1) Grille (2) Accessory kit (4) Light bulb (1) Side marker bulb (2) Headlight bulb (7) Tail light bulb (4) Antifreeze coolant (5) License plate light (2) (1) Engine (7) Transmission fluid (1) Engine oil (4) Clock (24) Door trim panel (5) Front bumper (5) Rear bumper (7) Brake pads (3) Tires (2) Pump (1) Fuel pump (6) Car door (2) Push button (2) Power window switch (6) Instrument cluster (1) Radiator (6) Fuse box (46) Seat (1) Crankshaft position sensor (1) Door lock (3) Suspension system (1) Side mirror (4) AdBlue warning light (4) Warning light – error code (7) (12) Tire pressure warning light (6) Service warning light (23) Drivetrain (1) Center console tunnel (4) EGR valve (2) Blower motor (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos