Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Brake Pads

Model: Mercedes Classe M W163 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Brake pads

See other generations:
Video tutorial

Brake pads serve to clamp the brake disc to create friction that slows down the rotation of the disc. Brake pads wear out before the discs, so they need to be changed more frequently.

To change the pads, lift the vehicle on a jack and remove the wheels from the axle. Push the piston of the brake cylinder back using a screwdriver.

Disassembly should be done on one pair of pads at a time. To remove the caliper and take out the pads, remove the clips and springs.

When removing the pads, pay attention to how the components are arranged to ensure everything is correctly positioned during reassembly.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Brake Pad Replacement
Brake Pad Replacement
Mercedes Classe M (2005-2011 / W164) Lift the vehicle on suitable axle stands and remove the wheel; take off the protective caps from the caliper securing bolts and unscrew them; detach …
Replacing Rear Brake Pads
Replacing Rear Brake Pads
Mercedes Classe M (1997-2005 / W163) Lift the vehicle using a car jack or on suitable axle stands and remove the rear wheel. To aid the retraction of the caliper piston, the video shows …
Replacing Front Discs and Pads
Replacing Front Discs and Pads
Mercedes Classe M (1997-2005 / W163) Once you have lifted the vehicle, remove the front wheel, disconnect the brake wear sensor, extract the retaining pins of the pads, lever between the…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos