Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Brake Pads

Model: Mercedes Classe M W163 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Brake pads

See other generations:
Video tutorial

Lift the vehicle using a car jack or on suitable axle stands and remove the rear wheel. To aid the retraction of the caliper piston, the video shows a method that is not actually necessary: a tube is applied to the bleed valve, which is connected to a bottle for collection; open the valve by loosening the pin and then leverage between the disc and pad to retract the piston.

In any case, once the caliper is removed, it is sufficient to press the piston with a C-clamp without opening the bleed valve. Then, loosen the caliper mounting bolts, remove it from its position, and extract the pads; fit the new ones, connect the wear sensor, reposition the caliper, and tighten the bolts.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Replacing the Brake Pads
Replacing the Brake Pads
Mercedes Classe M (1997-2005 / W163) Brake pads serve to clamp the brake disc to create friction that slows down the rotation of the disc. Brake pads wear out before the discs, so they n…
Brake Pad Replacement
Brake Pad Replacement
Mercedes Classe M (2005-2011 / W164) Lift the vehicle on suitable axle stands and remove the wheel; take off the protective caps from the caliper securing bolts and unscrew them; detach …
Replacing Front Discs and Pads
Replacing Front Discs and Pads
Mercedes Classe M (1997-2005 / W163) Once you have lifted the vehicle, remove the front wheel, disconnect the brake wear sensor, extract the retaining pins of the pads, lever between the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos