Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Headlight

Mercedes Classe M - Headlight

Mercedes Classe M (2005-2011 / W164)
Headlight replacement on Mercedes M-Class
Open the hood. Unscrew the two 10-piece bolts securing the upper part of the front bumper laterally, so that it can be moved slightly to create space. Unscrew …read all…
Posted on 6 January 2024 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Right front headlight replacement
Quick and easy procedure, lift the hood of the car and release the hook fasteners on the right side of the headlight, in this way by applying a gentle lever …read all…
Posted on 18 September 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Headlight bulb replacement
In order to replace the headlight bulbs, the headlight itself must be removed since there is not enough room for maneuver to operate from the engine …read all…
Posted on 8 September 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Front headlight disassembly instructions
To be able to disassemble the headlight, start by opening the front hood, unhook and remove the trim molding located just below the headlight itself (it has a …read all…
Posted on 19 August 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Front headlight disassembly instructions
Removing the headlight is very simple and above all, unlike many other models, it does not require disassembly of the bumper: it is in fact sufficient to …read all…
Posted on 12 August 2023 by ScegliAuto
Airbags (3) Loudspeaker (2) Air conditioning (3) Car stereo (5) Battery (11) Coil (1) Air Vents (3) Gearbox (8) Spark plugs (1) Glow plugs (4) Bodywork (4) Control unit (1) Key (5) Timing belt (1) V-belt (4) Air conditioning controls (1) -board computer (7) Checks and maintenance (25) Dashboard (1) Bearing (2) Mass air flow sensor (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Grille (2) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (4) Rear light bulb (2) Antifreeze liquid (5) License plate light (1) Third brake light (1) Engine (8) Gear oil (1) Engine oil (4) Door panel (5) Front bumper (4) Rear bumper (6) Brake pads (3) Hydraulic pistons (1) Tires (3) Pump (1) Fuel pump (6) Door (3) Push button (2) Window lift button (5) Instrument cluster (4) Radiator (4) Fuse box (17) Crankshaft RPM sensor (1) Lock (2) Suspensions (1) Outside rearview mirror (2) Transmission (1) Central tunnel (4) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos