Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Front headlight disassembly instructions

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Headlight
Operation: Front headlight disassembly instructions

To be able to disassemble the headlight, start by opening the front hood, unhook and remove the trim molding located just below the headlight itself (it has a plastic tab at the internal edge), then unscrew the three fastening pins, one upper and two at the bottom and release the plastic tab that secures it to the edge of the mudguard; at this point it is possible to extract the headlight from its seat and pull it forward enough to disconnect the socket. All in all, this is a very simple operation, above all because it does not require disassembly of the bumper.


Posted on 19 August 2023 by ScegliAuto



Front headlight disassembly instructions
Mercedes Classe M (1997-2005 / W163) Removing the headlight is very simple and above all, unlike many other models, it does not require disassembly of the bumper: it is in fact sufficien
Front door removal instructions
Mercedes Classe M (1997-2005 / W163) The disassembly of the front door is quite simple to carry out, and if it is a car destined for scrapping from which some spare parts are being recov
How to replace the headlight bulb of the Mercedes M-Class
Mercedes Classe M (2005-2011 / W164) In this guide of ours we will explain how to correctly replace the headlight bulb of your Mercedes M-Class. We can already tell you that this is a ve

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos