Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : -board computer

Mercedes Classe M - -board computer

Mercedes Classe M (2005-2011 / W164)
How to reset the Run flat indicator on Mercedes ML 350
Run flat tires have an important peculiarity, in the event of a significant loss of pressure they are still able to support the weight of the car and are only …read all…
Posted on 2 May 2023 by ScegliAuto
Mercedes Classe M (2005-2011 / W164)
How to reset the service light on the Mercedes W164 ML
The service warning light that you see on the display of your Mercedes M-Class w164 is nothing more than a simple reminder that has the function of reminding …read all…
Posted on 10 April 2024 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
How to reset the maintenance indication on the -Mercedes ML 270
As a first operation, start the dashboard of your car in this way you will be able to control the on-board computer, after having started the dashboard of your …read all…
Posted on 29 September 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Instructions for resetting the service light
To reset the SERVICE warning light on the instrument panel it is necessary to have a diagnostic tool, also of the after market type; once the regular …read all…
Posted on 24 August 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Airbag fault warning light reset instructions
If the restraint system (SRS) or airbag warning light remains on on the instrument panel display at the end of the self-check, a diagnostic tool must be used …read all…
Posted on 11 August 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Checking the engine oil level via the on-board computer
This video explains how to check the engine oil level using the on-board computer controls. The car in question is a Mercedes M-Class. Park and turn off the …read all…
Posted on 29 July 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Service warning light reset-reset
It is possible to reset the warning light relating to the SERVICE message manually. It is therefore advisable to first proceed with regular maintenance, i.e. …read all…
Posted on 27 July 2023 by ScegliAuto
Airbags (3) Loudspeaker (2) Air conditioning (3) Car stereo (5) Battery (11) Coil (1) Air Vents (3) Gearbox (8) Spark plugs (1) Glow plugs (4) Bodywork (4) Control unit (1) Key (5) Timing belt (1) V-belt (4) Air conditioning controls (1) -board computer (7) Checks and maintenance (25) Dashboard (1) Bearing (2) Mass air flow sensor (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Grille (2) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (4) Rear light bulb (2) Antifreeze liquid (5) License plate light (1) Third brake light (1) Engine (8) Gear oil (1) Engine oil (4) Door panel (5) Front bumper (4) Rear bumper (6) Brake pads (3) Hydraulic pistons (1) Tires (3) Pump (1) Fuel pump (6) Door (3) Push button (2) Window lift button (5) Instrument cluster (4) Radiator (4) Fuse box (17) Crankshaft RPM sensor (1) Lock (2) Suspensions (1) Outside rearview mirror (2) Transmission (1) Central tunnel (4) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos