Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe M
  6. : Ignition coil

Mercedes Classe M - Ignition coil

Ignition Coil Mercedes Classe M (1997-2005 / w 163)

Mercedes Classe M (1997-2005 / W163)
Ignition Coil Replacement

If the engine struggles to start or runs unevenly, it is possible that a cylinder is not firing due to a malfunction of the corresponding spark plug or …Read all…
Posted on 28 February 2026 by ScegliAuto

Cigarette lighter (1) Airbag (4) Speaker (3) Air conditioning (4) Car stereo (8) Roof rack bars (1) Battery (16) Ignition coil (1) Air vents (3) Transmission (7) Spark plugs (1) Glow plugs (4) Body (6) Glove compartment (1) Control unit (3) Key (5) Timing belt (5) V-belt (5) A/C controls (1) Onboard computer (2) Checks and maintenance (10) Dashboard (2) Bearing (3) MAF sensor (1) Brake rotors (1) Rear bench seat (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (9) Cabin air filter (8) Oil filter (1) Parking brake (1) Clutch (1) Grille (2) Accessory kit (4) Light bulb (1) Side marker bulb (2) Headlight bulb (7) Tail light bulb (4) Antifreeze coolant (5) License plate light (2) (1) Engine (7) Transmission fluid (1) Engine oil (4) Clock (24) Door trim panel (5) Front bumper (5) Rear bumper (7) Brake pads (3) Tires (2) Pump (1) Fuel pump (6) Car door (2) Push button (2) Power window switch (6) Instrument cluster (1) Radiator (6) Fuse box (46) Seat (1) Crankshaft position sensor (1) Door lock (3) Suspension system (1) Side mirror (4) AdBlue warning light (4) Warning light – error code (7) (12) Tire pressure warning light (6) Service warning light (23) Drivetrain (1) Center console tunnel (4) EGR valve (2) Blower motor (1) Steering wheel (2)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos