Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Accessory Kit

Mercedes Classe M - Accessory Kit

Mercedes Classe M (1997-2005 / W163)
How to replace the door handle of your car
The handle is designed to be able to open the car doors, it not only provides comfort but also safety, in fact in the event of an accident, the door opening …read all…
Posted on 12 September 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Front led bar installation
If the car is equipped with a front bull bar, an LED bar could be added to illuminate the road almost as day but it is recommended to switch it off when …read all…
Posted on 23 August 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Tow hook installation
In order to install the tow hook it is first of all necessary to remove the rear bumper: then unhook the two caps at the ends of the bumper and the one in the …read all…
Posted on 18 August 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Transmission oil temperature thermometer installation
Monitoring the oil temperature of the automatic transmission can be especially useful if the vehicle is to be used under particularly loaded conditions, such …read all…
Posted on 13 August 2023 by ScegliAuto
Airbags (3) Loudspeaker (2) Air conditioning (3) Car stereo (5) Battery (11) Coil (1) Air Vents (3) Gearbox (8) Spark plugs (1) Glow plugs (4) Bodywork (4) Control unit (1) Key (5) Timing belt (1) V-belt (4) Air conditioning controls (1) -board computer (7) Checks and maintenance (25) Dashboard (1) Bearing (2) Mass air flow sensor (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Grille (2) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (4) Rear light bulb (2) Antifreeze liquid (5) License plate light (1) Third brake light (1) Engine (8) Gear oil (1) Engine oil (4) Door panel (5) Front bumper (4) Rear bumper (6) Brake pads (3) Hydraulic pistons (1) Tires (3) Pump (1) Fuel pump (6) Door (3) Push button (2) Window lift button (5) Instrument cluster (4) Radiator (4) Fuse box (17) Crankshaft RPM sensor (1) Lock (2) Suspensions (1) Outside rearview mirror (2) Transmission (1) Central tunnel (4) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos