Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Handle of Your Car

Model: Mercedes Classe M W163 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Accessory kit

See other generations:
Video tutorial

The handle is designed to open car doors, providing not only comfort but also safety. In the event of an accident, door handles must allow passengers to exit the vehicle.

This guide shows how to install the door handle of your car if you wish to change it. The old handle is secured with screws that need to be removed, holding the plastic cover of the door in place. Once all screws are removed, you can take off the door cover and observe the handle lock from the inside, which will be secured with screws to the door.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to Replace Your Car's Gearbox
How to Replace Your Car's Gearbox
Mercedes Classe M (1997-2005 / W163) Car maintenance is never enough. This guide provides useful tips on how to replace your car's gearbox. First, purchase a new gearbox for your vehicle…
Replacing the Car Door Panel
Replacing the Car Door Panel
Mercedes Classe M (1997-2005 / W163) With a bit of dedication and passion, you can perform this operation yourself. Once the door panel is removed, you will be able to access the speaker…
Replacement of Rear Car Headlamp
Replacement of Rear Car Headlamp
Mercedes Classe M (1997-2005 / W163) Sometimes, car headlamps can get damaged due to an accident or simply because they have broken, and it is necessary to replace them. The lamps are am…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos