Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Car rear light replacement

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Tail light
Operation: Car rear light replacement

Sometimes it can happen that the headlights of the car are damaged, due to an accident or perhaps simply because they are broken, and it is necessary to replace them. Headlights make up some of the essential parts of an automobile. They are used, in fact, to produce signal light beams or to illuminate the road, guaranteeing the driver an optimal view of the roadway. The guide shows you how to replace the rear light. First you need to buy suitable lights. Usually it is possible to access the screws, or bolts, for fixing the lights by opening the trunk, or from inside the passenger compartment, near the rear floor, usually using a hex wrench. Once the bolts or screws have been unscrewed, the electrical cables that feed the light bulbs must be disconnected so as to be able to remove it.


Posted on 13 September 2023 by ScegliAuto



Rear light bulb replacement
Mercedes Classe M (1997-2005 / W163) In order to replace the rear light bulb it is necessary to remove the light itself: then open the luggage compartment, unscrew the fixing screws of t
Replace the rear light on Mercedes M-Class
Mercedes Classe M (1997-2005 / W163) Replace the rear light of the car? We open the tailgate of the B-Class to access the headlight and remove it as best we can. Using a screwdriver, uns
How to replace the front fog light on a Mercedes M-Class
Mercedes Classe M (2005-2011 / W164) Before starting, we will have to get out of the cockpit of our Mercedes M-Class, and then head towards the front. So let's start by disengaging and r

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos