Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlamp on a Mercedes M-Class

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Tail light

Replacing the rear headlamp of the car? Open the boot of the M-Class to access the headlamp and remove it properly. Use a screwdriver to remove the securing screws located at the side of the headlamp. Disconnect the rear headlamp from its housing once all screws are removed and disconnect the power connectors. Replace the damaged bulbs with new ones (same size and voltage). Refit the rear headlamp above the car's body, tightening all screws at the side. Get into the vehicle and turn on the operating levers. Check the operation of the bulbs.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Fog Light on a Mercedes M-Class
How to Replace the Front Fog Light on a Mercedes M-Class
Mercedes Classe M (2005-2011 / W164) .. you begin, exit the cabin of your Mercedes M-Class and head to the front. Start by prising off and removing the fog light surround using a thin but.. …
How to Remove the Rear Bumper of a Mercedes M-Class
How to Remove the Rear Bumper of a Mercedes M-Class
Mercedes Classe M (2005-2011 / W164) .. open the tailgate of the boot on your Mercedes M-Class. Begin by unscrewing and removing the screws that secure the rear bumper to the chassis, located.. …
How to replace the rear headlight bulb of the Mercedes M-Class
How to replace the rear headlight bulb of the Mercedes M-Class
Mercedes Classe M (2011-2018 / W166) .. the rear headlight bulb of the 2012 Mercedes M-Class is a bulb and a flat-head screwdriver. Let's start by opening the trunk and inserting the flat-head.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos