Do it yourself
| ||||
|
Mercedes Classe M - Video tutorial
Model: Mercedes Classe M
W163
- Years 1997-2005 The piston supporting the tailgate is actually a gas spring: its function, in addition to keeping the hood in the open position, is also to facilitate opening and slow down the descent phase. in the closing maneuver, avoiding that it can bang too violently; replacing this spring is very simple but before proceeding with the disassembly, it is advisable to check the conformity of the spare part, ie the length and type of attachment; therefore open the rear hood and remove the safety device applied to the lower spherical hinge, support the hood and release both the lower and upper hinges and then proceed in reverse to fit the new spring.
Posted on 30 September 2023 by ScegliAuto
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |