Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : MAF sensor

Mercedes Classe M - MAF sensor

MAF Sensor Mercedes Classe M (1997-2005 / w 163)

Mercedes Classe M (1997-2005 / W163)
Cleaning the Air Flow Sensor - Mass Air Flow Meter
This video demonstrates how to remove and clean the mass air flow sensor. First, locate the sensor and disconnect the connector attached to it, then remove the …Read all…
Posted on 15 February 2026 by ScegliAuto
Cigarette lighter (1) Airbag (4) Speaker (3) Air conditioning (4) Car stereo (8) Roof rack bars (1) Battery (16) Ignition coil (1) Air vents (3) Transmission (7) Spark plugs (1) Glow plugs (4) Body (6) Glove compartment (1) Control unit (3) Key (5) Timing belt (5) V-belt (5) A/C controls (1) Onboard computer (2) Checks and maintenance (10) Dashboard (2) Bearing (3) MAF sensor (1) Brake rotors (1) Rear bench seat (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (9) Cabin air filter (8) Oil filter (1) Parking brake (1) Clutch (1) Grille (2) Accessory kit (4) Light bulb (1) Side marker bulb (2) Headlight bulb (7) Tail light bulb (4) Antifreeze coolant (5) License plate light (2) (1) Engine (7) Transmission fluid (1) Engine oil (4) Clock (24) Door trim panel (5) Front bumper (5) Rear bumper (7) Brake pads (3) Tires (2) Pump (1) Fuel pump (6) Car door (2) Push button (2) Power window switch (6) Instrument cluster (1) Radiator (6) Fuse box (46) Seat (1) Crankshaft position sensor (1) Door lock (3) Suspension system (1) Side mirror (4) AdBlue warning light (4) Warning light – error code (7) (12) Tire pressure warning light (6) Service warning light (23) Drivetrain (1) Center console tunnel (4) EGR valve (2) Blower motor (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos