Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Outside rearview mirror

Mercedes Classe M - Outside rearview mirror

Mercedes Classe M (2011-2018 / W166)
Removing the exterior mirror cap on Mercedes M-Class
Removing the mirror glass is very simple on Mercedes M-Class: as shown in the video, pry behind it and then disconnect the connector while pulling it out. At …read all…
Posted on 7 March 2024 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
How to replace the interior mirror indicator bulb on a Mercedes M-Class
Let's see in this video how to replace the internal indicator light bulb of the rear-view mirror of a Mercedes M-Class. Very simple operation if you proceed in …read all…
Posted on 6 October 2023 by ScegliAuto
Airbags (3) Loudspeaker (2) Air conditioning (3) Car stereo (5) Battery (11) Coil (1) Air Vents (3) Gearbox (8) Spark plugs (1) Glow plugs (4) Bodywork (4) Control unit (1) Key (5) Timing belt (1) V-belt (4) Air conditioning controls (1) -board computer (7) Checks and maintenance (25) Dashboard (1) Bearing (2) Mass air flow sensor (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Grille (2) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (4) Rear light bulb (2) Antifreeze liquid (5) License plate light (1) Third brake light (1) Engine (8) Gear oil (1) Engine oil (4) Door panel (5) Front bumper (4) Rear bumper (6) Brake pads (3) Hydraulic pistons (1) Tires (3) Pump (1) Fuel pump (6) Door (3) Push button (2) Window lift button (5) Instrument cluster (4) Radiator (4) Fuse box (17) Crankshaft RPM sensor (1) Lock (2) Suspensions (1) Outside rearview mirror (2) Transmission (1) Central tunnel (4) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos