Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the external rearview mirror of the Mercedes M-Class

Model: Mercedes Classe M W163 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Side mirror

See other generations:
Video tutorial

In a few simple steps, we will see the process of disassembling and replacing the external rearview mirror of the Mercedes M-Class. First, we open the front door of the vehicle and begin to remove the triangular plastic cover located behind the mirror, where there is also a small speaker; then we unscrew the fixing screws of the rearview mirror, disconnecting the electrical connector of the adjustment to remove it from the outside, as shown in the video: At this point we replace and install the new mirror, finally adjusting its angle!


Posted on 5 July 2025 by ScegliAuto


Related tutorials

How to replace the external rearview mirror of the Mercedes M-Class
How to replace the external rearview mirror of the Mercedes M-Class
Mercedes Classe M (2005-2011 / W164) .. the external rearview mirror of the Mercedes M-Class. First, we open the front door and start by removing the triangular plastic cover located behind.. …
How to Change the Key Battery on Mercedes Benz ML
How to Change the Key Battery on Mercedes Benz ML
Mercedes Classe M (2005-2011 / W164) To easily replace the batteries in your Mercedes Benz ML key at home, follow the instructions in this short video. Unlike other Mercedes keys, you do…
How to Remove the Rear Bumper of a Mercedes M-Class
How to Remove the Rear Bumper of a Mercedes M-Class
Mercedes Classe M (2005-2011 / W164) .. open the tailgate of the boot on your Mercedes M-Class. Begin by unscrewing and removing the screws that secure the rear bumper to the chassis, located.. …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos