Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Removing and replacing the speaker from the front door.

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Loudspeaker
Operation: Removing and replacing the speaker from the front door.

First of all, you need to remove the inner panel of the front door. To do this we must remove, using a screwdriver, the covers located in the handle, under the safety of the lock and in correspondence with the rear-view mirror. Now we unscrew the three screws that are in the handle and under the safety. We can remove the panel using a screwdriver to disengage it at the clips. Once removed, we pull out the lock cable and disconnect the speaker. Finally we unscrew the two screws that hold the speaker and extract the same from its housing. The maintenance operation that is performed in the images is carried out on a Mercedes M-Class.


Posted on 13 September 2023 by ScegliAuto



Removing the Mercedes ML 350 door panel
Mercedes Classe M (2005-2011 / W164) In this video tutorial we will see how to remove the door panel of a Mercedes ML 350. First we open the rear door and with a lever we remove the plas
Rear door speaker replacement
Mercedes Classe M (1997-2005 / W163) To replace the rear door loudspeakers, it is first necessary to remove the door trim panel: start by removing the cover from the handle grip by lever
Front door removal instructions
Mercedes Classe M (1997-2005 / W163) The disassembly of the front door is quite simple to carry out, and if it is a car destined for scrapping from which some spare parts are being recov

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos