Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Rear door speaker replacement

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Loudspeaker
Operation: Rear door speaker replacement

To replace the rear door loudspeakers, it is first necessary to remove the door trim panel: start by removing the cover from the handle grip by levering with a plastic tool, the plug at the rear and unscrewing the screws underneath; release the pressure clips along the edges of the panel to be able to remove it, disconnecting the safety device, the lock cable and the courtesy light socket; once the panel has been removed, it is possible to access the loudspeaker fixing screws to be able to disassemble it by disconnecting the relative socket; proceed in reverse to install the new speaker.


Posted on 10 August 2023 by ScegliAuto



Removing and replacing the speaker from the front door.
Mercedes Classe M (1997-2005 / W163) First of all, you need to remove the inner panel of the front door. To do this we must remove, using a screwdriver, the covers located in the handle,
Removing the Mercedes ML 350 door panel
Mercedes Classe M (2005-2011 / W164) In this video tutorial we will see how to remove the door panel of a Mercedes ML 350. First we open the rear door and with a lever we remove the plas
Car door replacement
Mercedes Classe M (1997-2005 / W163) The following guide shows how to replace the door of your car in the best way without having to go to a specialized body shop and without spending to

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos