Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Mercedes Classe M - Speaker

Speaker Mercedes Classe M (1997-2005 / w 163)

Mercedes Classe M (1997-2005 / W163)
Replacement of the front door speakers of the Mercedes M-Class.
In this guide we will see the main instructions that will allow us to disassemble and replace the door speakers of the front door of the Mercedes Class M. …Read all…
Posted on 20 August 2025 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Removal and Replacement of the Front Door Speaker
First, remove the inner panel of the front door. Use a screwdriver to remove the covers located at the handle, under the lock mechanism, and near the wing …Read all…
Posted on 5 March 2026 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Rear Door Speaker Replacement
To replace the rear door speakers, first remove the door trim panel: start by removing the handle cover using a plastic tool, the cap at the back, and unscrew …Read all…
Posted on 20 February 2026 by ScegliAuto
Cigarette lighter (1) Airbag (4) Speaker (3) Air conditioning (4) Car stereo (8) Roof rack bars (1) Battery (16) Ignition coil (1) Air vents (3) Transmission (7) Spark plugs (1) Glow plugs (4) Body (6) Glove compartment (1) Control unit (3) Key (5) Timing belt (5) V-belt (5) A/C controls (1) Onboard computer (2) Checks and maintenance (10) Dashboard (2) Bearing (3) MAF sensor (1) Brake rotors (1) Rear bench seat (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (9) Cabin air filter (8) Oil filter (1) Parking brake (1) Clutch (1) Grille (2) Accessory kit (4) Light bulb (1) Side marker bulb (2) Headlight bulb (7) Tail light bulb (4) Antifreeze coolant (5) License plate light (2) (1) Engine (7) Transmission fluid (1) Engine oil (4) Clock (24) Door trim panel (5) Front bumper (5) Rear bumper (7) Brake pads (3) Tires (2) Pump (1) Fuel pump (6) Car door (2) Push button (2) Power window switch (6) Instrument cluster (1) Radiator (6) Fuse box (46) Seat (1) Crankshaft position sensor (1) Door lock (3) Suspension system (1) Side mirror (4) AdBlue warning light (4) Warning light – error code (7) (12) Tire pressure warning light (6) Service warning light (23) Drivetrain (1) Center console tunnel (4) EGR valve (2) Blower motor (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos