Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Car stereo

Mercedes Classe M - Car stereo

Mercedes Classe M (2005-2011 / W164)
How to disassemble the car stereo of a Mercedes M-Class
Before we can start, we will have to sit on the driver's seat of our Mercedes M-Class. Let's start by going to disengage and extract the air conditioning …read all…
Posted on 21 February 2024 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Remove the original stereo of a Mercedes M-Class
Remove the original stereo of a Mercedes M-Class? Let's see in this video how to proceed for the right disassembly. First of all we remove the panel of the …read all…
Posted on 11 October 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
How to replace the stereo of the Mercedes ML 270
To protect any more delicate circuits it will be necessary to unhook the hood from the special lever and lift the hood to fix it with the special rod, …read all…
Posted on 2 October 2023 by ScegliAuto
Mercedes Classe M (1997-2005 / W163)
Car radio disassembly instructions
In order to disassemble the car radio, it is necessary to have the appropriate extraction keys to be applied in the special slots present at the lower corners: …read all…
Posted on 13 August 2023 by ScegliAuto
Mercedes Classe M (2005-2011 / W164)
VIM module interface installation
Unhook the panel with the climate control controls and disconnect the sockets connected to it. Unscrew the two fixing screws of the car radio located in the …read all…
Posted on 30 June 2023 by ScegliAuto
Airbags (3) Loudspeaker (2) Air conditioning (3) Car stereo (5) Battery (11) Coil (1) Air Vents (3) Gearbox (8) Spark plugs (1) Glow plugs (4) Bodywork (4) Control unit (1) Key (5) Timing belt (1) V-belt (4) Air conditioning controls (1) -board computer (7) Checks and maintenance (25) Dashboard (1) Bearing (2) Mass air flow sensor (1) Brake discs (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (8) Cabin air filter (6) Oil filter (1) Hand brake (1) Clutch (1) Grille (2) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (2) Headlight bulb (4) Rear light bulb (2) Antifreeze liquid (5) License plate light (1) Third brake light (1) Engine (8) Gear oil (1) Engine oil (4) Door panel (5) Front bumper (4) Rear bumper (6) Brake pads (3) Hydraulic pistons (1) Tires (3) Pump (1) Fuel pump (6) Door (3) Push button (2) Window lift button (5) Instrument cluster (4) Radiator (4) Fuse box (17) Crankshaft RPM sensor (1) Lock (2) Suspensions (1) Outside rearview mirror (2) Transmission (1) Central tunnel (4) EGR valve (1) Interior blower (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos