Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : How to disassemble the car stereo of a Mercedes M-Class

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W164 - Years 2005-2011
Part: Car stereo
Operation: How to disassemble the car stereo of a Mercedes M-Class

Before we can start, we will have to sit on the driver's seat of our Mercedes M-Class. Let's start by going to disengage and extract the air conditioning control panel, levering it with a thin but resistant tool, and then moving it. After that, we will have to unscrew and remove the lower screws that secure the radio to the dashboard. By doing so, we will have freed the car radio. We therefore proceed by removing the radio from the dashboard, and then disconnect the various electrical connectors. When we have disconnected all the connectors, we will have successfully completed their disassembly.


Posted on 21 February 2024 by ScegliAuto



Remove the original stereo of a Mercedes M-Class
Mercedes Classe M (1997-2005 / W163) .. Remove the original stereo of a Mercedes M-Class? Let's see in this video how to proceed for the right disassembly. First of all we remove the panel..
How to replace the stereo of the Mercedes ML 270
Mercedes Classe M (1997-2005 / W163) To protect any more delicate circuits it will be necessary to unhook the hood from the special lever and lift the hood to fix it with the special rod
How to disassemble the fuel pump in the Mercedes M-Class?
Mercedes Classe M (2011-2018 / W166) .. to disassemble the fuel pump in the Mercedes M-Class, a simple operation but one that requires good manual dexterity. First of all, we lift the vehicle..

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos