Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Original Stereo from a Mercedes M-Class

Model: Mercedes Classe M W163 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Car stereo

See other generations:
Video tutorial

How to remove the original stereo from a Mercedes M-Class? Follow this video for the correct disassembly procedure. First, use a plastic lever to remove the control panel of the ventilation system, then, with the help of a screwdriver, unscrew the screws of the metal tabs located on the sides of the stereo until it disengages from the dashboard.

Now, pull the stereo out of the dashboard, disconnect the various power connectors located at the rear and the antenna reception cable. Extract the unit from its slot.

To reassemble the various disassembled parts, proceed in reverse order.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Replace the Stereo in a Mercedes ML 270
How to Replace the Stereo in a Mercedes ML 270
Mercedes Classe M (1997-2005 / W163) To protect any delicate circuits, you will need to release the bonnet from the designated lever and lift it using the support rod. Disconnect the bat…
Replacement of the immobilizer transponder of the Mercedes M-Class
Replacement of the immobilizer transponder of the Mercedes M-Class
Mercedes Classe M (1997-2005 / W163) .. of the immobilizer of the Mercedes M and ML Class. First of all, we get on board the car, on the driver's side, and start by removing the plastic.. …
How to remove the roof bars on the Mercedes M-Class
How to remove the roof bars on the Mercedes M-Class
Mercedes Classe M (1997-2005 / W163) .. the original roof bars from the Mercedes M-Class. First, move to the outside and start by removing the plastic covers located on the sides of the.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos