Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located on the Mercedes ML 250?

Model: Mercedes Classe M W164 - Years 2005-2011
Part: Dashboard

If you do not know where the OBD port of your Mercedes ML 250 is located, do not worry because in the following guide you will find all the directions you need to be able to locate it in a few seconds and in total safety. First of all, enter the car and make sure it is turned off, then reach the lower area of the dashboard and locate the small door present. At this point, open it with your own hands in order to have free access to the OBD port you were looking for. Finally, connect to it any diagnostic tool compatible with your Mercedes ML 250.

Posted on 2 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Mercedes M-Class?
How to reset the tyre pressure warning light on the Mercedes M-Class?
Mercedes Classe M (2005-2011 / W164) To reset the tyre pressure warning light on the Mercedes M-Class, first inflate the tyres to the recommended pressure value, which is indicated on th…
The reset of the AdBlue warning light in a car, how does it happen?
The reset of the AdBlue warning light in a car, how does it happen?
Mercedes Classe M (2011-2018 / W166) The procedure shown in the tutorial video is applicable not only to the Mercedes ML used here but to any type of vehicle. Having clarified this, let'…
Where is the engine fuse box located in the Mercedes Class M W166?
Where is the engine fuse box located in the Mercedes Class M W166?
Mercedes Classe M (2011-2018 / W166) If you are wondering where the engine fuse box of your Mercedes M-Class W166 is located, then you are in the right place. All you need to do is read …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos