|
Do it yourself
| |||
| ||||
How to disassemble the central console of a Mercedes A-Class AMG
Model: Mercedes Classe A
W177
- Years 2018-2026
In this video we can see how to disassemble the central console of a Mercedes A-Class AMG: we start by prying with a plastic spatula on the chrome trim located on the rear edge of the console. This will reveal two cross screws that we will remove; this will allow us to take off the entire central part of the console, where the gear shift, radio, and climate control are located, which we can remove more easily on the workbench. We will need to disconnect all the connectors located behind, then from the console we will disassemble the infotainment screen and the electronic gear shift, which is located just below, by unscrewing the four screws. At the top, there are the air vents, and we will remove the air conditioning controls by snapping out the clips. Now we remove the CD player and finally take out the air vents by snapping the metal clips on the sides.
Posted on 26 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Mercedes Classe A
(2018-2026 /
W177)
Today's instructions will guide us through the process of disassembling and replacing the central console of the Mercedes A-Class. First, we get into…
Mercedes Classe A
(2012-2018 /
W176)
In order to replace the water pump on the Mercedes A 45 AMG, you need to access the left side of the engine block: here you will first need to releas…
Mercedes Classe A
(2012-2018 /
W176)
In order to reset the Service light on the Mercedes A45 AMG, you need to turn on the instrument panel and then navigate to the menu using the steerin…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.079
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |