Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Air Vents of the Mercedes A-Class

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Air vents

This guide and these brief steps will show you how to remove and replace the air vents of the Mercedes A-Class. First, get inside the vehicle and use the appropriate removal tool to pull out the air vent fixed to the dashboard; the vent is held in place by side clips, as shown in the video. At this point, replace and install the new air diffusers if necessary, inserting them into the opening and securing them properly; finally, rotate the vent to your liking, directing the airflow.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Mercedes A-Class
How to Remove the Radio from a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. Is the radio in your Mercedes A-Class to be replaced? Here’s how to remove it from above the dashboard. To remove the radio, you need t.. …
How to Remove the Radio from a Mercedes A-Class?
How to Remove the Radio from a Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. To remove the radio from a Mercedes A-Class, first, pull out the two side air vents located directly above the device. Once these are removed,.. …
How to Replace the Vents on a Mercedes W176
How to Replace the Vents on a Mercedes W176
Mercedes Classe A (2012-2018 / W176) .. Replacing the vents on a Mercedes A-Class is a very simple task. Today, with the help of our short video tutorial, you will learn how to.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos