Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe A
  6. : How do you remove the car radio of the Mercedes A-Class?

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Car stereo
Operation: How do you remove the car radio of the Mercedes A-Class?

In order to remove the car radio of the Mercedes A-Class you have to go and remove the two side air vents that are immediately above the device: after these have been removed, it will be possible to go and pry inside it by pushing the radio towards the external. After the device has then been removed from its housing, it will be possible to disconnect the connectors on its back and remove it completely. At this point it will be possible to connect the new radio to the connectors, inserting it inside its housing and also installing the vents.


Posted on 13 September 2022 by ScegliAuto



Mercedes A-Class car radio disassembly
Mercedes Classe A (2012-2018 / W176) .. how to disassemble the car radio of a Mercedes A-Class third series. First we go to remove the air vents that we find above the radio (to do this it will..
How to unlock the radio of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. To unlock the radio of the Mercedes Class A, the first thing to do is to find the radio unlock code; The code can be found in the vehicle's..
How do you replace the car radio of the Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. In order to replace the Mercedes A-Class radio, you need to remove the plastic panel located under the radio and above the air conditioning..

    Frequently Asked Questions

    • Classe A 2004-2012 - Why does the Mercedes A-Class car radio no longer turn on? Read Answer
    • Classe A 1997-2004 - Why does the display of the Mercedes A-Class w168 not work? Read Answer
    • Classe A 2018-2024 - Why does the car radio of the Mercedes A-Class not work? Read Answer
    • Classe A 1997-2004 - Where is the Mercedes A-Class car radio fuse located? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos