Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Vents on a Mercedes W176

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Air vents

Replacing the vents on a Mercedes A-Class is a very simple task. Today, with the help of our short video tutorial, you will learn how to perform this operation independently. Start by lifting the car and removing the tires. Once this is done, proceed to remove the wheel arch liners by taking out the screws and clips. Now that you have better access to the lower side of the car, remove the vent. Clean its housing and apply sealant along the entire gasket, then insert the new vent. Reassemble everything.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Mercedes A-Class
How to Remove the Radio from a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) Is the radio in your Mercedes A-Class to be replaced? Here’s how to remove it from above the dashboard. To remove the radio, you need to take out the…
How to Remove the Factory Radio from a Mercedes-Benz A-Class W176
How to Remove the Factory Radio from a Mercedes-Benz A-Class W176
Mercedes Classe A (2012-2018 / W176) In this video tutorial, you will learn how to remove the factory radio from a Mercedes-Benz A-Class W176 by following these simple steps. First, get …
Where to Find the OBD Port on Mercedes A-Class W176
Where to Find the OBD Port on Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) In this new guide for all of you with a Mercedes A-Class W176 (2012-2018), we will discover where the OBD port is located and how to use it independe…

Other guides you may be interested in

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos