Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Tyre Pressure on the Mercedes-Benz B-Class W245?

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Tires

To check the tyre pressure on the Mercedes-Benz B-Class W245, you will need an air compressor. Portable ones cost a few dozen pounds and can be easily found in various types of shops, even in bazaars. If you already have one, bring it close to your car and connect it to one tyre at a time to measure the pressure, increasing it if necessary. The correct pressure values for each tyre are indicated on the inside of the fuel filler flap. After adjusting each tyre to the correct pressure, you can get in the car and reset the pressure warning light.

Posted on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Starter Motor on the Mercedes-Benz B-Class W245
Removing the Starter Motor on the Mercedes-Benz B-Class W245
Mercedes Classe B (2005-2011 / W245, MK 1) .. and replace the starter motor on the Mercedes-Benz B-Class W245, as well as on the A-Class W176. First, open the bonnet and remove the upper engine.. …
Resetting the Tyre Pressure Warning Light on a Mercedes B-Class
Resetting the Tyre Pressure Warning Light on a Mercedes B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) In today's video tutorial, you will learn how to reset the tyre pressure warning light on a Mercedes B-Class; before performing the operation, ensure…
How to Connect Your Smartphone via Bluetooth on the Mercedes-Benz B-Class W245
How to Connect Your Smartphone via Bluetooth on the Mercedes-Benz B-Class W245
Mercedes Classe B (2005-2011 / W245, MK 1) .. to the multimedia system of your Mercedes-Benz B-Class W245, first series. To do this, first, get inside the car and turn on the ignition; then.. …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos