Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Factory Radio on the Mercedes A-Class W169

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Car stereo

Discover the steps to remove and replace the factory radio on the Mercedes A-Class W169 in this brief and simple guide. First, get inside the car and pry on the sides of the air vents using something thin to release and remove them. Next, remove the four screws from the stereo, as shown in the video. At this point, gently pull out the radio and disconnect all the electrical connectors on the back to remove it completely. Apply the reverse procedure for reinstallation!

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the car radio from the Mercedes Class A W169
How to remove the car radio from the Mercedes Class A W169
Mercedes Classe A (2004-2012 / W169) To easily remove the factory car radio in your Mercedes Class A W169, you must follow the steps described below. First, go inside the car and make su…
How to remove the factory radio from a Mercedes A-Class W169
How to remove the factory radio from a Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) In this video, we will see how to remove the factory radio from a Mercedes Class A W169: we will need a plastic spatula to remove the frame that cont…
How to Remove and Replace the Factory Radio in the Mercedes A-Class
How to Remove and Replace the Factory Radio in the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) Today's guide will show you the steps to remove and replace the factory radio in the Mercedes A-Class. First, get inside the vehicle and start by rem…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos