Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the car radio from the Mercedes Class A W169

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
This video is currently unavailable

To easily remove the factory car radio in your Mercedes Class A W169, you must follow the steps described below. First, go inside the car and make sure it is turned off, then use a flat screwdriver to remove the plastic cover located above the air vents above the radio.

Once you have done this, take a Phillips screwdriver and unscrew all the screws holding the radio in place and remove it after disconnecting the electrical cable. The procedure is now successfully completed.


Posted on 12 February 2025 by ScegliAuto


Related tutorials

How to Remove and Replace the Factory Radio on the Mercedes A-Class W169
How to Remove and Replace the Factory Radio on the Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) Discover the steps to remove and replace the factory radio on the Mercedes A-Class W169 in this brief and simple guide. First, get inside the car and…
How to Remove the Radio from a Mercedes A-Class?
How to Remove the Radio from a Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) In this tutorial, we will see how to remove the radio in a Mercedes A-Class, a very simple and quick operation. For this, you will need a set of scre…
How to replace the radio in the Mercedes A-Class
How to replace the radio in the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) Today we will discover the instructions that will allow us to disassemble and replace the original radio of the Mercedes Classe A. First of all, we g…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos