Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear seats of the Nissan Qashqai?

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Seat

See other generations:
Video tutorial

It is normal to feel the need to wash, as the years go by, the seats of your car, or to carry out a repair or replacement of the upholstery fabric. If we decide to do one of the aforementioned operations ourselves, we just have to dismantle the seats independently and start the work.

As for the rear seats of the vehicle in question, here is how it should be done: You need to grab the seat on both sides and lift it, making sure that the fastening tabs are released. Then, proceed to remove the safety belt sockets from the seats and finally extract the entire structure from the cabin.


Posted on 16 May 2025 by ScegliAuto


Related tutorials

How to Lower the Rear Seats in a Nissan Qashqai
How to Lower the Rear Seats in a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) To lower the rear seats in a Nissan Qashqai, open the rear doors or the boot, and if necessary, slightly move the front seats forward to create enoug…
How to Remove the Rear Seats of the Nissan Qashqai
How to Remove the Rear Seats of the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) To remove the rear seats of the Nissan Qashqai, access the back of the car and apply a firm but gentle upward pull on the left seat first, followed b…
How to Lower the Rear Seats in the Nissan Qashqai?
How to Lower the Rear Seats in the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) In this tutorial, you will see how to lower the rear seats in the Nissan Qashqai, a very simple and quick operation, for example, when you need more …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos