Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Third stop replacement on Nissan Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Third brake light
Operation: Third stop replacement on Nissan Qashqai

Using a flat screwdriver or a lever (possibly made of plastic and not iron like the one used in the video) you simply have to remove from the bodywork, a small part at a time, the casing relating to the central stop. VoilÃ! Nothing else is needed. If you intend to replace the entire casing, simply unplug the connector and connect it to the new casing, then snap it into place. If, on the other hand, you need to change the bulb, you just need to open the casing and unscrew it, then screw the new one on. It is therefore a very simple operation that anyone can do for themselves.


Posted on 4 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos