Do it yourself
Frequently asked questions about cars and motorcycles

How to Temporarily Disable or Activate Start&Stop on the Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

In this brief and simple guide, we will provide the instructions that will allow you to temporarily activate or deactivate Start&Stop on the Nissan Qashqai. First, open the engine bonnet of your car and start by removing the small cap of the Start&Stop connector, using a 10 mm socket to unscrew the bracket nut; then connect the sensor to ground to disable it permanently, as shown in the video.

At this point, get inside the vehicle and check that Start&Stop is temporarily disabled!


Updated on 11 July 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2014-2022 / J11) Today's guide will show you the steps to temporarily disable the Start&Stop system of the Nissan Qashqai. First, get in the vehicle and start the eng…
Nissan Qashqai (2014-2022 / J11) To deactivate the Start&Stop system on the Nissan Qashqai, loosen the screws securing the control panel located at the bottom left of the steering co…
Nissan Qashqai (2014-2022 / J11) To disable the Start&Stop of the Nissan Qashqai, loosen the screws that secure the control panel located at the bottom left of the steering column. O…

    Frequently Asked Questions

    • Qashqai 2014-2022 - Have there been any issues reported with the 2015 Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai indicator relay located? Read answer
    • Qashqai 2014-2022 - How do you disable Start and Stop in a Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Why are the Nissan Qashqai steering wheel buttons not working? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos