Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Third Brake Light Bulb on the Nissan Frontier

Model: Nissan Frontier D41 - Years 2021-2026
Part:

In this video, let's see how to replace the third brake light on the Nissan Frontier: from inside the cabin, remove the plastic clips located at the third brake light using a plastic trim tool. At this point, we can remove the two nuts with an 8 mm socket; this will allow us to take out the housing that contains the third brake light, disconnecting the electrical connector located in the center. The bulb connector is located exactly in the center; replace it without touching it with your hands, then reconnect the connector. Align the screws in their holes and tighten the nuts, securing the housing in place. Reattach the plastic clips, and you have completed the job.

Posted on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Third Brake Light Bulb on a Nissan Frontier?
How to Replace the Third Brake Light Bulb on a Nissan Frontier?
Nissan Frontier (1997-2021 / D40) In this tutorial, you will see how to replace the third brake light bulb on a Nissan Frontier, a very simple operation. First, go inside the cabin, t…
Replacement of the front headlight bulb of the Nissan Frontier
Replacement of the front headlight bulb of the Nissan Frontier
Nissan Frontier (1997-2021 / D40) Today's information will show us the procedure for disassembling and replacing the headlight bulb of the Nissan Frontier. First, we open the hood of …
How to Replace the Headlight Bulb on a Nissan Frontier
How to Replace the Headlight Bulb on a Nissan Frontier
Nissan Frontier (1997-2021 / D40) To replace the headlight bulb on a Nissan Frontier, open the hood to access the components inside the engine compartment. Specifically, you need to r…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos