Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front and Rear Headlight Bulbs of the Nissan Note

Model: Nissan Note E11, MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Light bulb

See other generations:
Video tutorial

In this guide, you will find instructions for removing and replacing the front and rear headlight bulbs of the Nissan Note. First, open the engine bonnet and start by removing the plastic protective cap of the bulbs; disconnect the electrical connector and unclip the metal spring to remove and replace the bulb with a new one, as shown in the video.

Next, the replacement of the rear bulbs is also illustrated, by removing the light unit; all that remains is to check the correct functioning of the bulbs!


Posted on 25 May 2026 by ScegliAuto


Related tutorials

Removing the Bulbs on a Nissan Note
Removing the Bulbs on a Nissan Note
Nissan Note (2004-2013 / E11, MK 1) Remove the damaged bulbs from the front headlamp of a Nissan Note. Open the front bonnet by pulling the lever located at the bottom right of the dash…
Replace the Front Headlight Bulbs on Nissan Note
Replace the Front Headlight Bulbs on Nissan Note
Nissan Note (2004-2013 / E11, MK 1) Are the front headlight bulbs damaged? Here’s how to change them on the Nissan Note. Open and lift the front bonnet by pulling the lever located at t…
Removing the Rear Lights of the Nissan Note
Removing the Rear Lights of the Nissan Note
Nissan Note (2004-2013 / E11, MK 1) Today's guide shows you how to remove and replace the rear lights and their bulbs of the Nissan Note, following these simple steps. First, move to th…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos