Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Light Bulb on a Nissan X-Trail

Model: Nissan X Trail MK 2, T31 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Light bulb

See other generations:
Video tutorial

In this short guide, find the instructions to remove and replace the reverse light bulb on a Nissan X-Trail. First, move to the rear of the vehicle and start by removing the reverse light located on the rear bumper; disconnect the electrical connector at the back, remove the bulb, and replace it with a new one (of the correct type and with the same fitting), as shown in the video.

Then, reinstall the reverse light on the rear bumper, checking the light's operation.


Posted on 3 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light on the Nissan X Trail
How to Replace the Rear Light on the Nissan X Trail
Nissan X Trail (2001-2006 / MK 1, T30) .. and replace the rear light on the Nissan X Trail. First, open the boot lid and start unscrewing the two securing screws located on the sides using.. …
Where is the fuse box of the Nissan X Trail T30 located?
Where is the fuse box of the Nissan X Trail T30 located?
Nissan X Trail (2001-2006 / MK 1, T30) .. guide dedicated to all of you who own a Nissan X Trail T30, we will describe the various steps you need to take to locate the fuse box of the vehicle... …
How to Replace the Cabin Fan Resistor on the Nissan X-Trail?
How to Replace the Cabin Fan Resistor on the Nissan X-Trail?
Nissan X Trail (2014-2023 / MK 3, T32) .. replace the cabin fan resistor on the Nissan X-Trail by opening the glove compartment on the passenger side: this can then be freed from the corresponding.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos