|
Do it yourself
| |||
| ||||
How to Remove the Rear Bumper of a Nissan Note
Model: Nissan Note
E11, MK 1
- Years:
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
Let's see how to remove the rear bumper of a Nissan Note: start by removing the screws underneath the bumper. There are 3 screws per side in the rear wheel arch (2 visible and one further in). In the wheel arch, there are push clips that can be removed by pressing in the centre with a thin object; they are often stuck due to dirt, so patience is required. Inside each wheel arch, behind the plastic wing, there are two 10 mm screws per side; to access them, gently pull the plastic wing outwards, insert a screwdriver to hold it open, and unscrew with a 10 mm socket. Now, reach the top of the bumper, where there are two more 10 mm screws per side that need to be removed. The bumper is attached at the sides with hooks that fit into ball sockets: with one hand, pull the bumper outwards and with the other, pry from inside the wheel arch, pushing the hook outwards. There are 3 hooks per side. Now, only the fog lights are connected, and the connector is difficult to release; you need to rotate the entire light unit counterclockwise, as if it were a light bulb. Now the bumper is free.
Posted on 24 July 2026 by ScegliAuto
Related tutorials
Nissan Note
(2004-2013 /
E11, MK 1)
.. How to remove the rear bumper of a Nissan Note? This operation is not too complex if done methodically... …
Nissan Note
(2004-2013 /
E11, MK 1)
In today's tutorial video, we will go through the steps to remove and replace the air conditioning fan resistor on the Nissan Note E11. First, get in…
Nissan Note
(2004-2013 /
E11, MK 1)
Before starting, open the bonnet of your Nissan Note. Begin by unclipping and removing the rear cover of the fire wall. This will give you access to …
Other guides you may be interested in
|
How to reset the tyre pressure warning light on the Kia Niro EV?
To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.147
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |