Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Wheel of a Nissan Altima?

Model: Nissan Altima L32 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Wheel

See other generations:
Video tutorial

To remove the front wheel of a Nissan Altima, start by ensuring the car is on a flat surface and engage the parking brake. Use a cross wrench or a ratchet wrench with the correct socket to slightly loosen the wheel bolts while the wheel is still on the ground.

Lift the car with a floor jack, placing it under the designated lifting point near the front fender. Loosen the bolts slightly while the wheel is on the ground.

Then, lift the car with the jack, completely remove the bolts and the wheel. Check the tread and inspect the wheel.

If necessary, replace it. Reinstall the wheel, tightening the bolts according to the specified torque. Finally, lower the car from the jack and regularly check the tire pressure.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

Nissan Altima (2007-2012 / L32) Today, you will learn how to remove and replace the serpentine belt on a Nissan Altima by following these simple steps. First, lift the vehicle and s…
Nissan Altima (2013-2018 / L33) To replace the front brake pads on a Nissan Altima, lift the car with a jack so that the corresponding wheel is not in contact with the ground. Once …
Nissan Altima (2007-2012 / L32) In today's video tutorial, we will see how to remove and replace the control arm on a Nissan Altima, following the instructions below. First, lift th…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Warning Light on the MG HS

When the tyre warning light (TPMS) illuminates on the dashboard of your new MG HS, it means the vehicle's control unit has detected a puncture or abnormal pressures. Below, we will discover what you need to do to quickly and easily eliminate this warning light. First, pay attention to the sticker located on the side of the door and note the recommended tyre pressures, then proceed to inflate or replace the tyres if there is a puncture. At this point, start the car and drive a few miles to force a new data reading.

Watch the video!


by ScegliAuto

More videos