Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb in a Hyundai i30?

Model: Hyundai I30 MK 3, PD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Headlight bulb

See other generations:
Video tutorial

To replace the front headlamp bulb in a Hyundai i30, open the bonnet to access the components inside the engine bay: here you can access the internal part of the corresponding headlamp, allowing you to detach the internal protective cover. The bulb can now be removed from its housing by disconnecting the connectors and connecting the new bulb.

Ensure to close the headlamp with the cover, making sure the bulb functions correctly.


Updated on 12 August 2026 by ScegliAuto


Related tutorials

How to replace the front headlight bulb of the Hyundai I30
How to replace the front headlight bulb of the Hyundai I30
Hyundai I30 (2011-2016 / GD, MK 2) To correctly and safely replace one of the bulbs in the front headlight of your Hyundai I30 second edition, you must follow all the steps described i…
How to replace the front headlight bulb of the Hyundai I30
How to replace the front headlight bulb of the Hyundai I30
Hyundai I30 (2016-2024 / MK 3, PD) Below we will discover the instructions that will allow us to disassemble and replace the headlight bulb of the Hyundai I30. First, open the hood of …
Removing the Front Headlight and Replacing Bulbs on a Hyundai i30
Removing the Front Headlight and Replacing Bulbs on a Hyundai i30
Hyundai I30 (2016-2024 / MK 3, PD) When one of the bulbs in the front headlight of the Hyundai i30 burns out, it is advisable to remove the headlight from its housing for easier replac…

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos