Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor of the Hyundai IX35

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part:

In order to manually reset the tire pressure warning light on the instrument panel of your Hyundai IX35, you must follow all the steps described in the following guide. First of all, get into the car and reach the driver's seat, then turn on the instrument panel and locate the "Set" button with the tire pressure warning light icon on it. At this point, hold down the button and release it as soon as the TPMS light stops flashing on the instrument panel display. The reset procedure for the warning light is now successfully completed.

Posted on 24 February 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to reset the tire pressure sensor of the Hyundai IX35
How to reset the tire pressure sensor of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In the following guide you will find all the steps you need to follow in order to complete the manual reset of the tire pressure light on your Hyunda…
How to reset the TPMS light of the Hyundai IX35
How to reset the TPMS light of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Today we will explain how to reset the tire pressure warning light on the Hyundai IX35 vehicle after inflating the tires to the correct pressure. Pre…
Where is the tire pressure warning light reset button located in the Hyundai Ix35?
Where is the tire pressure warning light reset button located in the Hyundai Ix35?
Hyundai ix35 (2009-2015 / MK 1) The instrument panel of the Hyundai Ix35 is equipped with the tire pressure warning light, which lights up to alert the driver of low tire inflation …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos