Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Hyundai Ix35?

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Tire pressure warning light

In order to reset the tire pressure warning light of the Hyundai Ix35, you need to inflate the tires to the recommended pressure value: this value is indicated on the sticker attached to the driver's side door pillar. Once the tires have been inflated to this pressure value, you can insert the ignition key into the corresponding slot and turn on the instrument panel: you will need to wait a moment for the warning light to disappear from the instrument panel. If it does not turn off, you can drive for a few kilometers to try to turn off the warning light.

Posted on 7 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light of the Hyundai IX35
How to reset the TPMS light of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Today we will explain how to reset the tire pressure warning light on the Hyundai IX35 vehicle after inflating the tires to the correct pressure. Pre…
How do you reset the tire pressure light on the Hyundai Ix35?
How do you reset the tire pressure light on the Hyundai Ix35?
Hyundai ix35 (2009-2015 / MK 1) To reset the tire pressure light of the Hyundai Ix35, you need to inflate the tires until they reach the recommended pressure value: this value is in…
How to reset the tire pressure sensor of the Hyundai IX35
How to reset the tire pressure sensor of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In the following guide you will find all the steps you need to follow in order to complete the manual reset of the tire pressure light on your Hyunda…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos