Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light on a Hyundai IX35?

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part:

To reset the tire pressure light of a Hyundai IX35, turn on the instrument panel without starting the engine and locate the reset button located under the steering column. Proceed by pressing and holding the button until the light starts flashing or disappears completely from the instrument panel. This indicates that the system has recognized the new tire pressure calibration. Once the operation is completed, turn off the panel and turn it back on to ensure that the light remains off, indicating that the reset has been done correctly.

Posted on 11 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Hyundai Ix35?
How do you reset the tire pressure light on the Hyundai Ix35?
Hyundai ix35 (2009-2015 / MK 1) To reset the tire pressure light of the Hyundai Ix35, you need to inflate the tires until they reach the recommended pressure value: this value is in…
How to reset the tire pressure sensor of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In order to manually reset the tire pressure warning light on the instrument panel of your Hyundai IX35, you must follow all the steps described in t…
How to reset the TPMS light of the Hyundai IX35
How to reset the TPMS light of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Today we will explain how to reset the tire pressure warning light on the Hyundai IX35 vehicle after inflating the tires to the correct pressure. Pre…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos