Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor of the Hyundai IX35

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part:

In the following guide you will find all the steps you need to follow in order to complete the manual reset of the tire pressure light on your Hyundai IX35. First of all, make sure you have inflated the tires to the correct pressure and that there are no punctures, then enter the car and start the instrument panel. Immediately after, locate the button with the tire pressure light symbol on it and hold it down for a few seconds. Finally, wait for the reset of the light to be performed and release the button to finish the procedure.

Posted on 30 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on a Hyundai IX35?
How to reset the tire pressure light on a Hyundai IX35?
Hyundai ix35 (2009-2015 / MK 1) To reset the tire pressure light of a Hyundai IX35, turn on the instrument panel without starting the engine and locate the reset button located unde…
How to reset the tire pressure sensor of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In order to manually reset the tire pressure warning light on the instrument panel of your Hyundai IX35, you must follow all the steps described in t…
How to reset the TPMS light of the Hyundai IX35
How to reset the TPMS light of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Today we will explain how to reset the tire pressure warning light on the Hyundai IX35 vehicle after inflating the tires to the correct pressure. Pre…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos