Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Hyundai Ix35?

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part:

To reset the tire pressure light of the Hyundai Ix35, you need to inflate the tires until they reach the recommended pressure value: this value is indicated on the sticker attached to the driver's side door pillar. Once the inflation is done, you can turn on the instrument panel and then connect the diagnostic tool to the corresponding OBD port: at this point, you can follow the instructions in the tutorial to make the light disappear completely from the vehicle's instrument panel.

Posted on 17 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In order to manually reset the tire pressure warning light on the instrument panel of your Hyundai IX35, you must follow all the steps described in t…
How to reset the tire pressure sensor of the Hyundai IX35
How to reset the tire pressure sensor of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) In the following guide you will find all the steps you need to follow in order to complete the manual reset of the tire pressure light on your Hyunda…
How do you reset the tire pressure light on the Hyundai IX35?
How do you reset the tire pressure light on the Hyundai IX35?
Hyundai ix35 (2009-2015 / MK 1) It will be possible to completely reset the tire pressure warning light shown on the dashboard of the Hyundai IX35 by inflating the tires to the opti…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos